ASTM B363 Wpt2

Manufacturer of Titanium ASTM B363 Grade 2 Pipe Fittings and B363 Gr Wpt2


Titanium grade 2 fittings produced in accordance with the B363 are intended to be used for applications that require general corrosion resistance. Moreover, these titanium B363 Gr Wpt2 fittings have good formability properties and a number of options could be used to shape them. For instance, the B363 Pipe Fittings could be formed by a combination of processes including extruding, hammering, rolling, pressing, piercing, upsetting bending as well as fusion welding. As is typical of any American Society for Testing and Materials specification, the Titanium ASTM B363 Grade 2 Pipe Fittings are to be tested for not only the chemical requirements, but also the mechanical requirements.

An addition rule set by the specification involves the manufacturing process of B363 Wpt2 and testing parameters as well. The metals good formability also ensures that they can be shaped into various shapes such as tees, elbows, reducers etc. An B363 Wpt2 Reducer permits substitution in the size of a pipe in order to cater to the requirements of a hydraulic flow system. Or a reducer could also be used to adapt to an already existing different sized piping system. On the other hand, an B363 Equal Tee is often used in a piping system to change the direction of the flow at a 90 degree angle.

ASTM B363 Tee Grade Standard And Specification

Size 1/9” NBt to 26″ NB
Grades ASTM B363 Ti Cp Gr 1, B363 Ti Cp Gr 2 UNS R50400, B363 UNS R50250, B363 Ti Cp Gr 2, B363 UNS R50400.
Thickness Schedule 5s to XXS
Type Welded / Seamless / Fabricated
Dimensions ASME B16.28, ASME/ANSI B16.9, MSS-SP-43
Material ASTM B363 UNS R50250, Titanium Grade 2, B363 UNS R50400, Titanium Grade 1

B363 Long Radius Elbow Chemical Analysis

Element Content (%)
Titanium, Ti ≥ 98.9
Iron, Fe ≤ 0.30
Oxygen, O ≤ 0.25
Carbon, C ≤ 0.080
Nitrogen, N ≤ 0.030
Hydrogen, H ≤ 0.015

Physical Materials of B363 Ti Cp Gr 1 Fittings

Properties Metric Imperial
Density 4.51 g/cm3 0.163 lb/in3
Melting point 1660°C 3020°F

B363 Ti Cp Gr 2 Materials Mechanical Behaviour

Properties Metric Imperial
Tensile strength 485 MPa 70300 psi
Yield strength 345 MPa 50000 psi
Poisson's ratio 0.34-0.40 0.34-0.40
Elastic modulus 105 - 120 GPa 15200 - 17400 ksi
Elongation at break 28% 28%
Hardness (HV) 160-200 160-200

ASTM B363 Long Stubend Thermal Properties

Properties Metric Imperial
Thermal expansion co-efficient (@0.000-100°C/32-212°F) 8.60 µm/m°C 4.78 µin/in°F
Thermal conductivity 21.97 W/mK 152.5 BTU in/hr.ft².°F

Get info of ASTM B363 Wpt2 Reducer, ASTM B363 Equal Tee at factory rate.

Type WPT2 90 Degree Elbow
Size 2 Inch
THK: Sch40S
Surface treatment Transparent oil, rust-proof black oil or hot galvanized
Standards ANSI, ASTM,DIN, JIS, BS, ISO, GB, SH, AND HG etc
Applications Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc

Dimensions of Titanium ASTM B363 Grade 2 Pipe Fittings

Dimensions Butt Weld Elbows 45°-90° LR & 3D according to ASME B16.9
NPS O.D.
D
45°
Long Rad
Center to End
B
45°
3D
Center to End
B
90°
Long Rad
Center to End
A
90°
3D
Center to End
A
3/4 26.7 19 24 38 57
1 33.4 22 31 38 76
42.2 25 39 48 95
2 60.3 35 63 76 152
73 44 79 95 190
3 88.9 51 95 114 229
101.6 57 111 133 267
4 114.3 64 127 152 305
6 168.3 95 189 229 457
8 219.1 127 252 305 610
12 323.8 190 378 457 914
14 355.6 222 441 533 1067
16 406.4 254 505 610 1219